The EU and the UK agreed at their summit in Brussels on 20 November to link their emissions trading systems, Reuters reported, and Downing Street said “the deal is done” (Reuters; The Guardian). For EU buyers of UK-made coil, sections and bar, this is the precondition for those goods to leave CBAM, but nothing changes yet: UK-origin steel stays in scope until the link is in force and the UK is added to the CBAM exemption list. Buyer step: before you sign 2027 contracts with UK mills, agree how the CBAM cost in the price falls away once the UK is listed.
What was agreed, and what is still open
- Talks concluded, text not yet out. No 10 said both sides have agreed when the emissions trading deal will come into force and that the dates are in a joint statement “which will be published in due course”, followed by a legal process in each country (The Guardian).
- The two sides describe it differently. EU officials suggested the package depends on a separate deal on tuition fees; British sources said that is not their understanding (BBC).
- The exemption comes last. Ratification is needed on both sides, and under EU rules full market linking must take place before the UK can be exempt from the EU CBAM, Reuters reported. The UK government says the link would protect steel and aluminium from CBAM on about £6.5 billion of exports (GOV.UK).
The legal route is already in the CBAM Regulation. Goods originating in a country listed in point 1 of Annex III are outside CBAM, and a country is listed only when an agreement fully linking its ETS with the EU ETS has been concluded and its carbon price is effectively charged without rebates beyond those in the EU ETS. Origin follows the non-preferential rules, so steel made in a third country and shipped via the UK stays in scope (Regulation (EU) 2023/956, Article 2(4)–(6) and Annex III). Norway, Iceland, Liechtenstein and Switzerland are on that list today (see our 19 November piece).
Reach steel buyers and importers worldwide
Put your brand in front of the people who buy and trade steel.
Advertise with LoharoWhat has changed since our 14 October report. Then, the UK was only weighing CBAM changes and ETS linking was still under negotiation. The negotiation is now concluded on the UK’s account; the start date and the CBAM exemption date are not yet public.
Loharo calculation: what the exemption would remove per tonne
| UK-origin product (CN) | EU default value, tCO₂e/t | Certificates per 1,000 t | CBAM cost per 1,000 t | Per tonne |
|---|---|---|---|---|
| Hot-rolled coil and plate (7208) | 2.42 | 1,326 | €109,156 | €109.16 |
| Cold-rolled flat (7209) | 2.50 | 1,328 | €109,321 | €109.32 |
| Sections (7216) | 2.31 | 1,211 | €99,690 | €99.69 |
Analysis — what it means for your contract. On default values, a UK mill’s HRC carries about €109 a tonne of CBAM until the UK is listed, and nothing after it. If a 2027 offer from a UK mill includes a CBAM element, ask for it as a separate line and for a clause that removes it for goods imported after the UK’s listing in Annex III. Keep origin evidence from the mill, because UK-shipped steel made elsewhere keeps its CBAM cost. Mills with verified emissions, or an Article 9 deduction, may carry less than the table shows.
What to watch: the joint statement with the start dates; the EU and UK ratification steps; and the Commission act adding the UK to Annex III. The UK’s own CBAM starts on 1 January 2027 (Reuters).
Verification status: Developing
- As of 20 November 2026, 13:30 CET: the agreement is reported by Reuters and confirmed by Downing Street, but the joint statement with the start dates has not been published, and EU officials link the package to tuition-fee talks. The CBAM rules come from the Regulation’s consolidated text; per-tonne costs and the contract line are Loharo calculation and analysis. We will re-check when the joint statement is published.
- Key: Verified = material factual claims are supported by an appropriate primary source or clearly attributed reporting/market assessments; Partially verified = a specific material claim remains unsupported, contradicted or materially overstated; Analysis = interpretation or forecast with sourced premises; Developing = material facts are checked but the situation is still changing.
Sources
Primary sources
- Regulation (EU) 2023/956, consolidated text, Articles 2 and 9 and Annex III, EUR-Lex
- UK-EU Summit package: factsheet and mythbuster, Cabinet Office, GOV.UK, updated 18 November 2026
- Price of CBAM certificates, European Commission (Q3 2026: €82.32)
Supporting sources
- Explainer: What are the UK and EU carbon markets and what does linking them mean?, Reuters (via Global Banking & Finance Review), 20 November 2026
- UK says EU reset deal agreed but talks will continue “in some areas” (live), The Guardian, 20 November 2026
- UK-EU summit live, BBC News, 20 November 2026
- Loharo Free CBAM Calculator (United Kingdom; CN 7208, 7209, 7216; 2026 parameters), checked 20 November 2026
Last fact-check: 20 November 2026.
Planning steel imports into the EU? Estimate CBAM costs with the free calculator using EU default values. For supplier-specific emissions and a portfolio review, see the CBAM Cost Check.




