Domestic steel plate in Northern Europe rose to €860–885 a tonne ex-works on 12 November in Fastmarkets’ weekly assessment, up from €840–880 a week earlier, with mills offering €870–890 for first-quarter 2027 delivery and, market participants say, no free volume left for 2026 (Eurometal/Fastmarkets). For EU buyers of 8–40 mm plate, such as fabricators, pipe and tube makers and stockholders, imports look about €140 a tonne cheaper on paper. Loharo’s check shows that the Indian and Indonesian plate on offer lands well above European mill prices once the quota position and CBAM default values are counted. If your first-quarter plate is not yet covered, ask import suppliers for the planned customs clearance date and verified emissions data before you compare their offers with mill prices.
What has changed
According to Fastmarkets, as published by Eurometal, producers in Germany were reported fully booked for 2026 on 5 November because of strong demand from pipe projects. Buyers are not rushing: one trade source said stockists and cutting centres had already ordered large volumes for November–December rolling, and that a new market price would form in the next one to two weeks. Two traders put workable levels at €840–860, but the lower end was left out of the assessment for lack of mill interest.
Reach steel buyers and importers worldwide
Put your brand in front of the people who buy and trade steel.
Advertise with LoharoIn Southern Europe the assessment edged up €5 to €745–760 a tonne ex-works. An Italian re-roller put its plate production cost at €750–770 a tonne and said it needs €780 to keep selling into the first quarter, a level buyers have not yet accepted.
Analysis Loharo reconciliation: other reports point the same way. OPIS’s weekly round-up, carried by Eurometal on 9 November, had Northwest European plate at €860 ex-works and €870 delivered in Germany on 6 November. Tribune de la Sidérurgie reported on 3 November that German integrated mills charge at least €870 delivered for S355 plate, and quoted a Bavarian executive who expects €900 delivered to become the low end in the first quarter, with only a few German mills offering there so far. Read together, about €860–885 ex-works is today’s market and €900 delivered is a mill target, not yet a traded level.
Imports: cheaper on paper, not at the border
Fastmarkets kept its import assessment for Northern European ports at €710–750 a tonne CFR, but traders called offers “not available, or absolutely out of interest”. Into Spain, Indian and Indonesian plate was offered at €720–760 CFR, and sources said demand was limited by the stricter EU import regime, the tariff-quota measure that replaced the safeguard on 1 July 2026, with a 50% duty once a country’s quota is used up (European Commission).
The Commission’s TARIC records (last updated 12 November) show where the Q4 quarto-plate quotas stand. India’s 52,710 t (09.9856) and the 18,830 t for other countries without their own line (09.9609) were both used up on 1 October, the first day of the quarter. South Korea has 3,485 t left of 79,918 t and is flagged critical (09.9854); Indonesia has 14,632 t left of 53,154 t (09.9855) and Japan 12,507 t (09.9857).
Loharo calculation: what a €740 CFR import offer costs at the border
| Scenario (per tonne) | Offer CFR | Out-of-quota duty | CBAM, default values | Landed | vs South EU mill €752.50 | vs North EU mill €872.50 |
|---|---|---|---|---|---|---|
| India, cleared in Q4 2026 (quota used up) | €740 | €370 | €277.58 | €1,387.58 | +€635 | +€515 |
| India, cleared in Q1 2027 inside the new quota | €740 | €0 | €315.70 | €1,055.70 | +€303 | +€183 |
| Indonesia, cleared in Q4 2026 inside quota | €740 | €0 | €635.26 | €1,375.26 | +€623 | +€503 |
| Indonesia, cleared in Q1 2027 inside quota | €740 | €0 | €705.89 | €1,445.89 | +€693 | +€573 |
Analysis Even without the 50% duty, both origins land above European mill prices on default values. Verified supplier emissions are the only lever. With actual verified emissions (no default mark-up), an in-quota offer at €740 CFR matches the Northern European midpoint only if its embedded emissions are below about 2.9 t CO₂e a tonne: (€872.50 − €740) ÷ €82.32 = 1.61 t chargeable, plus the 1.34 t free-allocation deduction (1.37 × 0.975) in 2026 gives 2.95 t, or 2.91 t in 2027 (1.37 × 0.95 = 1.30). Against the Southern European midpoint the same working gives about 1.5 t (0.15 + 1.34). These break-evens use the same BF/BOF benchmark as the calculator.
What it means for your plate buying
- Analysis November–December cover: no step needed yet if your volumes are already booked; the trade expects a clearer Q1 price within two weeks. Our 9 November report found the same wait-and-see pattern in hot-rolled coil.
- Analysis Q1 2027 mill offers: compare them against the €860–885 ex-works range; treat €900 delivered as a mill target until deals confirm it.
- Analysis Import offers: ask for the planned clearance date (it decides both the quota quarter and the CBAM year), the origin’s quota line, and installation-level verified emissions. India’s Q4 plate quota went on the first day of the quarter, so an offer that relies on the Q1 quota may face the same risk; agree in the contract who pays the 50% duty if the quota is used up on arrival.
Stay ahead of the steel market
What to watch
- 19 November: Fastmarkets’ next weekly plate assessment, to see whether €870–890 first-quarter offers turn into deals.
- Weekly Commission quota report: South Korea’s 3,485 t and Indonesia’s 14,632 t of Q4 plate quota, tracked in Loharo’s Steel Trade Measures Tracker.
- 1 January 2027: new quarterly quotas open, and the 95% CBAM factor and 20% default mark-up apply to goods cleared from then; the Commission publishes the Q4 2026 certificate price on 4 January (European Commission). For the same arithmetic on coil, see our Indian HRC check.
Verification status: Verified
- Prices and market comments are Fastmarkets’ assessments and trade-source reports as published by Eurometal, consistent with OPIS and Tribune de la Sidérurgie reports; quota balances come from the Commission’s TARIC records (12 November update). The landed-cost and break-even figures are Loharo calculations with inputs shown.
- Key: Verified = material factual claims are supported by an appropriate primary source or clearly attributed reporting/market assessments; Partially verified = a specific material claim remains unsupported, contradicted or materially overstated; Analysis = interpretation or forecast with sourced premises; Developing = material facts are checked but the situation is still changing.
Sources
Primary sources
- Tariff quota 09.9856, India, quarto plates, 09.9855, Indonesia, 09.9854, South Korea, 09.9609, other countries and 09.9857, Japan, European Commission TARIC, last updated 12 November 2026
- Factsheet: EU steel measure, European Commission, DG Trade
- Price of CBAM certificates, European Commission, DG TAXUD (Q3 2026 price published 5 October 2026)
- Free CBAM calculator (official CBAM default values and benchmarks, Loharo CBAM data) and Steel Trade Measures Tracker, Loharo, read 13 November 2026
Supporting sources
- Local Northern European steel plate prices rise on tight availability; Italian market edges up, Eurometal (Fastmarkets), 13 November 2026
- European heavy plate round-up: EU heavy plate suppliers aim higher on costs, buyers resistant, Eurometal (OPIS), 9 November 2026
- Tôles / Allemagne, Italie : évolutions diverses (in French), Tribune de la Sidérurgie, 3 November 2026
Last fact-check: 13 November 2026.
Planning steel imports into the EU? Estimate CBAM costs with the free calculator using EU default values. For supplier-specific emissions and a portfolio review, see the CBAM Cost Check.




