• EU HRC (N. Europe)€750–785/tex-works N. Europe; seller tradeable €770–780/t for January volumes; buyer indications €750–765/t and €780–785/t ex-works; Fastmarkets index €770.83/t on 12 Nov12 Nov 2026 · Fastmarkets via EUROMETAL
  • China steel exports9.854 MtOctober; Jan–Oct 95.495 Mt, −2.3% y/y10 Nov 2026 · China Customs via Mysteel / SMM
  • World crude steel142.4 MtSeptember, −0.2% y/y23 Oct 2026 · worldsteel
  • Iron ore fines 61%$90.35/dmtseaborne 61% fines, SMM; +$0.15/dmt d/d13 Nov 2026 · SMM via Hellenic Shipping News
  • Turkish HMS 1&2 (80:20)$397/tCFR, October average11 Nov 2026 · GMK Center
  • EU CBAM certificate€82.32Q3 2026 price, per certificate5 Oct 2026 · European Commission
  • US Section 232 steel10%–50%tariff, by product/country8 Oct 2026 · Congressional Research Service

Assofermet asks the EU to lift the CBAM exemption to 500 tonnes: what it would mean for small steel importers

The Italian distributors’ association wants CBAM’s yearly exemption raised from 50 to 500 tonnes per importer before the downstream extension. Loharo’s table shows what each limit means in CBAM cost for a small coil importer; today’s 50-tonne rule still applies.

By Tavishi BalanPublished 5 min read
Illustration: a yellow bolt seal locking the door bar of a rusty red shipping container
Illustration of a security seal on an imported steel shipping container door

Assofermet, the Italian association of steel traders, distributors and processors, has asked the European Commission to raise CBAM’s yearly exemption from 50 to 500 tonnes per importer before the mechanism is extended to downstream steel and aluminium goods. For EU buyers this matters most to stockholders, fabricators and smaller importers bringing in a few hundred tonnes of coil, tube or fittings a year: on Loharo’s working, a 500-tonne limit would take up to about €139,000 a year of CBAM cost on Indian hot-rolled coil out of scope for one such importer. It is a request, not a rule. No step needed yet on contracts: keep budgeting CBAM under the 50-tonne limit in force today, and track your cumulative tonnage across all CBAM goods so you know which side of it you fall.

What Assofermet asked for

The association says it has put the request to the Commission so that extending CBAM to downstream products does not bring disproportionate paperwork for businesses (Assofermet, in Italian). According to SteelOrbis, which reported the letter on 11 November, it went to Commission President Ursula von der Leyen and to the tax and climate directorates, DG TAXUD and DG CLIMA. Assofermet argues that a finished article can weigh far more than the steel or aluminium in it, so a single tonnage limit could be disproportionate for small importers of goods such as hardware, tools and machinery parts. It cites earlier Commission analysis showing that, at 500 tonnes, about 97% of importers would fall outside CBAM yet 96.43% of embedded emissions in the original sectors would still be covered, and asks for a new impact assessment, possibly with limits by product group, plus anti-circumvention checks.

Advertise

Reach steel buyers and importers worldwide

Put your brand in front of the people who buy and trade steel.

Advertise with Loharo

The rule today is in Regulation (EU) 2025/2083. An importer is exempt when the net mass of all its CBAM goods (iron and steel, aluminium, cement and fertilisers together) does not exceed 50 tonnes in a calendar year. Cross it, and every tonne imported that year falls under CBAM, not just the excess. The limit is designed to keep at least 99% of embedded emissions in scope; the Commission reviews it each year and can change it by delegated act.

Two sources, two directions

Analysis. The request runs against Parliament’s mandate. In our 22 October report on the downstream talks we put Parliament’s list at 457 products; Assofermet speaks of about 500 categories. Both refer to the position adopted on 15 September; we keep the 457 from Parliament’s text and treat Assofermet’s figure as a rounded one. What is new since then is the threshold. Law firm Mayer Brown reads Parliament’s text as cutting the limit for aluminium goods from 50 to 5 tonnes, while the Commission and EU governments keep 50 tonnes. Assofermet wants it ten times higher. According to Mayer Brown, the second political round of talks is provisionally set for 30 November.

Loharo calculation: what each limit means for a small coil importer

Hot-rolled coil imported in 2026 (CN 7208)IndiaChinaTürkiyeUnder today’s 50 t limitUnder a 500 t limit
49 t€0€0€0ExemptExempt
51 t€14,159€9,138€5,598All 51 t in scopeExempt
200 t€55,484€35,727€21,979In scopeExempt
500 t€138,792€89,317€54,990In scopeExempt
Loharo calculation, EU default values, 2026 import year. Certificates per tonne = default value × 1.10 (2026 mark-up) − 0.975 (CBAM factor) × 1.370 (benchmark): India 4.28 gives 3.372, China 3.187 gives 2.170, Türkiye 2.428 gives 1.335. Totals = tonnes × certificates per tonne, rounded to whole certificates, × €82.32 (Q3 2026 price), as in Loharo’s free CBAM calculator. Inputs: Implementing Regulation (EU) 2026/1740, 2025/2620, Directive (EU) 2023/959, Commission certificate prices. Assumes coil is the importer’s only CBAM good.

Analysis. The table shows the cliff in today’s rule: the 51st tonne of Indian coil costs about €14,000, because it pulls the first 50 into scope too. Verified supplier emissions below the default would lower every figure; the free calculator shows by how much.

What it means for buyers

Buyer or fabricator: if you import between 50 and 500 tonnes a year, a 500-tonne limit would remove both the declaration and the certificate bill, but only if negotiators adopt it; plan on today’s rule. EU mill: a higher limit would let more small lots of imported coil and finished goods enter without a carbon cost; steelmakers have asked negotiators for the broadest possible extension, as our October report set out. Distributor or service centre: remember that the limit is per importer across all CBAM goods, so a few tonnes of aluminium or fasteners count towards it alongside coil.

What would change this view: a trilogue text that sets product-specific limits, or a Commission review that moves the 50 tonnes. Next watch: the round of talks set for 30 November, and the Q4 2026 certificate price due on 4 January.

Verification status: Verified

The request is confirmed by Assofermet’s own release; the letter’s recipients and the 97% and 96.43% figures are attributed to SteelOrbis’ report of it. The 50-tonne rule is checked against EUR-Lex, Parliament’s aluminium limit is Mayer Brown’s reading, and the cost table is a Loharo calculation on official default values, not a customs liability.

Ask the Analyst

“What could CBAM add to Indian HRC delivered to Rotterdam in 2027?”: landed cost with duty, quota and CBAM in one answer.Ask the Analyst

Sources

Primary sources

Supporting sources

Last fact-check: 13 November 2026. Market intelligence, not legal or investment advice.

Facts, analysis and uncertainty are labelled in line with our editorial standards. Report an error – corrections are dated and noted on the article. Information and analysis only, not investment advice.