• EU HRC (N. Europe)€750–785/tex-works N. Europe; seller tradeable €770–780/t for January volumes; buyer indications €750–765/t and €780–785/t ex-works; Fastmarkets index €770.83/t on 12 Nov12 Nov 2026 · Fastmarkets via EUROMETAL
  • China steel exports9.854 MtOctober; Jan–Oct 95.495 Mt, −2.3% y/y10 Nov 2026 · China Customs via Mysteel / SMM
  • World crude steel142.4 MtSeptember, −0.2% y/y23 Oct 2026 · worldsteel
  • Iron ore fines 61%$90.35/dmtseaborne 61% fines, SMM; +$0.15/dmt d/d13 Nov 2026 · SMM via Hellenic Shipping News
  • Turkish HMS 1&2 (80:20)$397/tCFR, October average11 Nov 2026 · GMK Center
  • EU CBAM certificate€82.32Q3 2026 price, per certificate5 Oct 2026 · European Commission
  • US Section 232 steel10%–50%tariff, by product/country8 Oct 2026 · Congressional Research Service

ArcelorMittal reportedly pauses Hamburg and Warsaw long mills and Beltrame stops: what a €100 wire rod rise means against imports

ArcelorMittal has reportedly paused its Hamburg and Warsaw long-product mills and wants about €100 a tonne more to restart, while Italy’s Beltrame is stopping on full days until year-end. Loharo compares a +€100 domestic wire rod price with Egyptian, Turkish and Chinese imports, and shows which EU quota lines for wire rod, rebar and merchant bars still have room.

By Mara AlvestadPublished 10 min read
Illustration: looking down from a crane cab into the scrap bay of an electric arc furnace shop in cloudy winter daylight
Illustration of the scrap bay of an electric arc furnace steel shop, seen from above

Developing As of 17 November 2026, 13:25 CET. ArcelorMittal has paused its long-product mills in Hamburg and Warsaw with immediate effect and is running Duisburg and Sosnowiec at reduced rates because of energy costs, sources told Kallanish (via EUROMETAL, 17 November). The company has not confirmed this publicly, and we found no ArcelorMittal statement. Italy’s Acciaierie Beltrame has confirmed full-day stoppages for the rest of November and December. The supply hit falls on wire rod, rebar and merchant bars in Germany, Poland and Italy. Your step this week: if you buy wire rod or bars from these mills, ask for written confirmation of December rolling dates and of any surcharge; if you need to switch, check the import line’s quota room before you order, because some lines are already empty.

What is reported, and what each mill makes

According to Kallanish’s sources, ArcelorMittal tried to raise prices for bars and rods, customers refused to pay, and the company stopped production and stopped taking orders for new contracts. The same sources say it would restart only if buyers accept increases of more than €100 a tonne for high-grade wire rod and about €100 for commodity rods and bars. All of this comes from unnamed sources reported by one agency, which Metallurgprom repeated, citing Kallanish. It is not company-confirmed. What the four mills make comes from ArcelorMittal’s own mill pages:

Advertise

Reach steel buyers and importers worldwide

Put your brand in front of the people who buy and trade steel.

Advertise with Loharo
MillReported status (Kallanish sources)Route and products (ArcelorMittal Bars & Rods)
Hamburg, GermanyPausedDRI plant and electric arc furnace; wire rod 5.5–17 mm; ArcelorMittal calls it a leader in high-quality wire rod
Warsaw, PolandPausedElectric arc furnace; rebar 10–50 mm, special-quality bars 20–105 mm
Duisburg, GermanyRestrictedSpecial wire rod 5.5–25 mm (cold heading, spring, bearing grades) and forging bars
Sosnowiec, PolandRestrictedWire rod 5.5–21 mm, rolled from billets supplied by Dąbrowa Górnicza
Sources: Kallanish via EUROMETAL (status); ArcelorMittal Bars & Rods mill pages for Hamburg, Warsaw, Duisburg and Sosnowiec, read 17 November 2026. ArcelorMittal does not publish capacities on these pages, so we do not estimate the tonnes lost.

Beltrame’s decision is on the record. Vice-president Barbara Beltrame Giacomello said on 11 November that energy prices, not the company, now decide when and how much it produces. Because the group’s casting sequences are long and continuous, it will stop for whole days rather than cut a few expensive hours (company note via Kallanish/EUROMETAL; Il Fatto Quotidiano). EUROMETAL and SMM describe this as a halt until year-end. ANSA calls them “major production stoppages” on some days. The company has not said how many days are affected. The company’s profile gives output of 1.1 Mt at its steel plant and 920,000 t at its rolling mills, without stating a year. Its main products are merchant bars, beams and special steels (company profile).

Loharo check: spot power has eased since the peak

Kallanish’s report says German day-ahead power reached €314.85/MWh on 29 October and has stayed above €250. Energy-Charts data confirm the 29 October figure. From 29 October to 11 November the daily average was €278.62/MWh, with only two days below €250. Since then it has averaged €184.04/MWh (12–17 November), and the daily average for 18 November, set in today’s auction, is €146.25 (Energy-Charts, Germany–Luxembourg, read 17 November; Loharo calculation: simple averages of quarter-hourly prices). Analysis So the reported halt comes after a week of lower spot prices. Mills buy forward as well as spot, so this does not show that the halt is unjustified, but it does mean the €100 restart premium is not simply today’s spot cost passing through. Ask what index any energy surcharge follows.

Loharo calculation: a domestic wire rod offer at +€100 against imports

The table uses SteelOrbis’s early-November indications for Germany (mesh quality €670–685/t and drawing quality €690–705/t delivered) and import offers of €595–600/t CFR for Turkish wire rod and €595–605/t CFR for Egyptian (SteelOrbis via EUROMETAL, 9 November). We then add the reported €100 restart premium to the German mesh-quality range. That is an illustration: ArcelorMittal’s own base prices are not public.

Option for mesh-quality wire rodInputsPrice, €/tAgainst German €670–685 todayAgainst €770–785 (+€100 scenario)
German mill, todaySteelOrbis, delivered670–685—€100 lower
German mill at the reported restart price670–685 + 100770–785€100 higher—
Egypt, in quota (09.9907: 11,991 t left)595–605 CFR, no quota duty595–605€65–90 lower€165–190 lower
Egypt, if its line runs out(595–605) × 1.5892.50–907.50€208–238 higher€108–138 higher
Türkiye (09.9900: 1 t left, so out of quota)(595–600) × 1.5892.50–900€208–230 higher€108–130 higher
China, in the residual quota line: highest CFR price that still breaks evenGerman price ÷ 1.24 (24% anti-dumping duty)540–552break-evenbreak-even at 621–633
China, out of quota: highest CFR price that still breaks evenGerman price ÷ 1.74 (24% + 50%)385–394break-evenbreak-even at 443–451
Loharo calculation. Duties are charged on the customs value; we use CFR as a stand-in, so the insurance element is left out. Port handling, inland freight to the buyer, financing and CBAM costs are not included. Once added, these narrow the import advantage, so the import rows show the best case. Each gap shows the full range, from the lowest import price against the highest domestic price to the reverse. Quota balances: TARIC, last allocation 16 November (Egypt 5 October, Türkiye 7 October). Chinese wire rod duty: 24% (Valin Group 7.9%) under Implementing Regulation (EU) 2021/1805, kept in force during the expiry review opened on 12 October 2026. We have no current Chinese offer, so we show break-even prices instead of a gap.

Analysis At the reported restart price, in-quota Egyptian wire rod is €165–190 a tonne below German mesh quality, so freight, handling and CBAM together would have to exceed that to close the gap. But Egypt’s fourth-quarter line has only 11,991 t left, and no allocation has been made against it since early October. Turkish wire rod is in effect out of quota and costs €108–130 more than even the +€100 German offer. For drawing and special grades, the Hamburg and Duisburg speciality, the table is less useful: few import sources make cold-heading or spring grades to the same specifications, so treat qualification time, not price, as the binding constraint.

Quota room for the products affected

Product (category)Lines with roomLines used up or nearly
Wire rod (16)Ukraine 09.9903 43,231 t of 47,417 t; other countries 09.9617 44,644 t of 51,662 t; UK 09.9902 36,192 t; Malaysia 09.9901 35,922 t (unused); Moldova 09.9906 14,944 t; Egypt 09.9907 11,991 t; Vietnam 09.9905 10,941 tTürkiye 09.9900 1 t left; Switzerland 09.9904 exhausted 5 November
Rebar (13)Ukraine 09.9889 16,577 t of 19,033 t; Egypt 09.9885 14,353 t of 36,159 t; Moldova 09.9887 11,993 t of 14,025 tTürkiye 09.9884 exhausted 1 October; Algeria 09.9886 988 t left; other countries 09.9614 down to 5,367 t of 15,831 t
Merchant bars and light sections (12)Türkiye 09.9879 35,112 t of 64,655 t; UK 09.9880 22,746 t; Switzerland 09.9881 17,327 tChina 09.9878 exhausted 29 October; other countries 09.9613 3,687 t of 11,810 t
Source: European Commission, TARIC tariff quota details for Q4 2026, read 17 November 2026 (most lines last allocated 16 November). Above quota, imports pay a 50% duty under Regulation (EU) 2026/1384. Live balances in Loharo’s Steel Trade Measures Tracker.

Analysis Wire rod has the most room: about 198,000 t is left across the seven lines listed. China has no wire rod line of its own, so on our reading its shipments draw on the residual “other countries” line. Rebar is tighter. Türkiye’s line has been empty since 1 October, and the residual line for countries without their own line is two-thirds used. For Polish buyers who lose Warsaw rebar, Ukraine’s line has the most room.

What has changed since our 11 and 16 November reports

Our 11 November report covered Federacciai’s warning, which named no companies. Beltrame is now a named Italian producer with a stated stoppage period. Our 16 November report looked at German rebar price rises and power costs. The reported ArcelorMittal halt moves the issue from price to physical supply, and also hits Poland. In the rebar quota, the other-countries line we showed at 12,222 t now has 5,367 t left after the 16 November allocation. Our 15 October report on the Chinese wire rod review still applies: the 24% duty stays in place while the review runs.

A sourcing checklist for long-product buyers

  • Analysis Open orders with ArcelorMittal’s long mills: the report concerns new contracts. Ask in writing whether confirmed December tonnes will roll, and from which mill.
  • Analysis Commodity mesh and rebar coil: compare a +€100 domestic offer with in-quota imports from Egypt, Ukraine or Moldova, and price in freight and CBAM (try the free calculator). Avoid Turkish wire rod and rebar this quarter unless the seller pays the 50% duty.
  • Analysis Drawing, cold-heading and spring grades: imports rarely substitute quickly. Ask other EU mills for slots now, and agree who pays if a surcharge follows spot power.
  • Analysis Italian merchant bars: with Beltrame stopping on full days, check Turkish, UK or Swiss bar offers, which still have quota room. Leave Chinese bars out: China’s line is used up.

Stay ahead of the steel market

We’ll email you a confirmation link. Unsubscribe anytime. See our Privacy Policy.

What to watch

  • ArcelorMittal confirmation: any statement or customer letter on the Hamburg and Warsaw restart terms.
  • Whether other mills follow: German and Polish mills that buy power on the spot market.
  • Weekly quota report (Fridays) and 1 January 2027: Egypt’s wire rod line and the rebar lines, and the new quarter’s opening.
  • German day-ahead power: a sustained return above €250/MWh would back up the mills’ case.

Verification status: Developing

  • As of 17 November 2026, 13:25 CET. The ArcelorMittal halts are reported by Kallanish from unnamed sources and are not confirmed by the company; we found no ArcelorMittal statement. Beltrame’s stoppages come from its own statement, as reported by EUROMETAL/Kallanish, Il Fatto Quotidiano and ANSA. Mill products come from ArcelorMittal’s and Beltrame’s own websites, power prices from Energy-Charts, wire rod prices from SteelOrbis via EUROMETAL, quota balances from TARIC, and the Chinese wire rod duty from Implementing Regulation (EU) 2021/1805 and the 12 October 2026 review notice. Price comparisons and break-even prices are Loharo calculations with inputs shown. Next re-check: by 24 November 2026, or sooner if ArcelorMittal comments.
  • Key: Verified = material factual claims are supported by an appropriate primary source or clearly attributed reporting/market assessments; Partially verified = a specific material claim remains unsupported, contradicted or materially overstated; Analysis = interpretation or forecast with sourced premises; Developing = material facts are checked but the situation is still changing.

Sources

Primary sources

Supporting sources

Last fact-check: 17 November 2026.

Planning steel imports into the EU? Estimate CBAM costs with the free calculator using EU default values. For supplier-specific emissions and a portfolio review, see the CBAM Cost Check.

Ask the Analyst

“Is there quota room for Turkish HRC entering the EU this quarter?”: landed cost with duty, quota and CBAM in one answer.Ask the Analyst

Facts, analysis and uncertainty are labelled in line with our editorial standards. Report an error – corrections are dated and noted on the article. Information and analysis only, not investment advice.