Developing As of 17 November 2026, 13:25 CET. ArcelorMittal has paused its long-product mills in Hamburg and Warsaw with immediate effect and is running Duisburg and Sosnowiec at reduced rates because of energy costs, sources told Kallanish (via EUROMETAL, 17 November). The company has not confirmed this publicly, and we found no ArcelorMittal statement. Italy’s Acciaierie Beltrame has confirmed full-day stoppages for the rest of November and December. The supply hit falls on wire rod, rebar and merchant bars in Germany, Poland and Italy. Your step this week: if you buy wire rod or bars from these mills, ask for written confirmation of December rolling dates and of any surcharge; if you need to switch, check the import line’s quota room before you order, because some lines are already empty.
What is reported, and what each mill makes
According to Kallanish’s sources, ArcelorMittal tried to raise prices for bars and rods, customers refused to pay, and the company stopped production and stopped taking orders for new contracts. The same sources say it would restart only if buyers accept increases of more than €100 a tonne for high-grade wire rod and about €100 for commodity rods and bars. All of this comes from unnamed sources reported by one agency, which Metallurgprom repeated, citing Kallanish. It is not company-confirmed. What the four mills make comes from ArcelorMittal’s own mill pages:
Reach steel buyers and importers worldwide
Put your brand in front of the people who buy and trade steel.
Advertise with Loharo| Mill | Reported status (Kallanish sources) | Route and products (ArcelorMittal Bars & Rods) |
|---|---|---|
| Hamburg, Germany | Paused | DRI plant and electric arc furnace; wire rod 5.5–17 mm; ArcelorMittal calls it a leader in high-quality wire rod |
| Warsaw, Poland | Paused | Electric arc furnace; rebar 10–50 mm, special-quality bars 20–105 mm |
| Duisburg, Germany | Restricted | Special wire rod 5.5–25 mm (cold heading, spring, bearing grades) and forging bars |
| Sosnowiec, Poland | Restricted | Wire rod 5.5–21 mm, rolled from billets supplied by Dąbrowa Górnicza |
Beltrame’s decision is on the record. Vice-president Barbara Beltrame Giacomello said on 11 November that energy prices, not the company, now decide when and how much it produces. Because the group’s casting sequences are long and continuous, it will stop for whole days rather than cut a few expensive hours (company note via Kallanish/EUROMETAL; Il Fatto Quotidiano). EUROMETAL and SMM describe this as a halt until year-end. ANSA calls them “major production stoppages” on some days. The company has not said how many days are affected. The company’s profile gives output of 1.1 Mt at its steel plant and 920,000 t at its rolling mills, without stating a year. Its main products are merchant bars, beams and special steels (company profile).
Loharo check: spot power has eased since the peak
Kallanish’s report says German day-ahead power reached €314.85/MWh on 29 October and has stayed above €250. Energy-Charts data confirm the 29 October figure. From 29 October to 11 November the daily average was €278.62/MWh, with only two days below €250. Since then it has averaged €184.04/MWh (12–17 November), and the daily average for 18 November, set in today’s auction, is €146.25 (Energy-Charts, Germany–Luxembourg, read 17 November; Loharo calculation: simple averages of quarter-hourly prices). Analysis So the reported halt comes after a week of lower spot prices. Mills buy forward as well as spot, so this does not show that the halt is unjustified, but it does mean the €100 restart premium is not simply today’s spot cost passing through. Ask what index any energy surcharge follows.
Loharo calculation: a domestic wire rod offer at +€100 against imports
The table uses SteelOrbis’s early-November indications for Germany (mesh quality €670–685/t and drawing quality €690–705/t delivered) and import offers of €595–600/t CFR for Turkish wire rod and €595–605/t CFR for Egyptian (SteelOrbis via EUROMETAL, 9 November). We then add the reported €100 restart premium to the German mesh-quality range. That is an illustration: ArcelorMittal’s own base prices are not public.
| Option for mesh-quality wire rod | Inputs | Price, €/t | Against German €670–685 today | Against €770–785 (+€100 scenario) |
|---|---|---|---|---|
| German mill, today | SteelOrbis, delivered | 670–685 | — | €100 lower |
| German mill at the reported restart price | 670–685 + 100 | 770–785 | €100 higher | — |
| Egypt, in quota (09.9907: 11,991 t left) | 595–605 CFR, no quota duty | 595–605 | €65–90 lower | €165–190 lower |
| Egypt, if its line runs out | (595–605) × 1.5 | 892.50–907.50 | €208–238 higher | €108–138 higher |
| Türkiye (09.9900: 1 t left, so out of quota) | (595–600) × 1.5 | 892.50–900 | €208–230 higher | €108–130 higher |
| China, in the residual quota line: highest CFR price that still breaks even | German price ÷ 1.24 (24% anti-dumping duty) | 540–552 | break-even | break-even at 621–633 |
| China, out of quota: highest CFR price that still breaks even | German price ÷ 1.74 (24% + 50%) | 385–394 | break-even | break-even at 443–451 |
Analysis At the reported restart price, in-quota Egyptian wire rod is €165–190 a tonne below German mesh quality, so freight, handling and CBAM together would have to exceed that to close the gap. But Egypt’s fourth-quarter line has only 11,991 t left, and no allocation has been made against it since early October. Turkish wire rod is in effect out of quota and costs €108–130 more than even the +€100 German offer. For drawing and special grades, the Hamburg and Duisburg speciality, the table is less useful: few import sources make cold-heading or spring grades to the same specifications, so treat qualification time, not price, as the binding constraint.
Quota room for the products affected
| Product (category) | Lines with room | Lines used up or nearly |
|---|---|---|
| Wire rod (16) | Ukraine 09.9903 43,231 t of 47,417 t; other countries 09.9617 44,644 t of 51,662 t; UK 09.9902 36,192 t; Malaysia 09.9901 35,922 t (unused); Moldova 09.9906 14,944 t; Egypt 09.9907 11,991 t; Vietnam 09.9905 10,941 t | Türkiye 09.9900 1 t left; Switzerland 09.9904 exhausted 5 November |
| Rebar (13) | Ukraine 09.9889 16,577 t of 19,033 t; Egypt 09.9885 14,353 t of 36,159 t; Moldova 09.9887 11,993 t of 14,025 t | Türkiye 09.9884 exhausted 1 October; Algeria 09.9886 988 t left; other countries 09.9614 down to 5,367 t of 15,831 t |
| Merchant bars and light sections (12) | Türkiye 09.9879 35,112 t of 64,655 t; UK 09.9880 22,746 t; Switzerland 09.9881 17,327 t | China 09.9878 exhausted 29 October; other countries 09.9613 3,687 t of 11,810 t |
Analysis Wire rod has the most room: about 198,000 t is left across the seven lines listed. China has no wire rod line of its own, so on our reading its shipments draw on the residual “other countries” line. Rebar is tighter. Türkiye’s line has been empty since 1 October, and the residual line for countries without their own line is two-thirds used. For Polish buyers who lose Warsaw rebar, Ukraine’s line has the most room.
What has changed since our 11 and 16 November reports
Our 11 November report covered Federacciai’s warning, which named no companies. Beltrame is now a named Italian producer with a stated stoppage period. Our 16 November report looked at German rebar price rises and power costs. The reported ArcelorMittal halt moves the issue from price to physical supply, and also hits Poland. In the rebar quota, the other-countries line we showed at 12,222 t now has 5,367 t left after the 16 November allocation. Our 15 October report on the Chinese wire rod review still applies: the 24% duty stays in place while the review runs.
A sourcing checklist for long-product buyers
- Analysis Open orders with ArcelorMittal’s long mills: the report concerns new contracts. Ask in writing whether confirmed December tonnes will roll, and from which mill.
- Analysis Commodity mesh and rebar coil: compare a +€100 domestic offer with in-quota imports from Egypt, Ukraine or Moldova, and price in freight and CBAM (try the free calculator). Avoid Turkish wire rod and rebar this quarter unless the seller pays the 50% duty.
- Analysis Drawing, cold-heading and spring grades: imports rarely substitute quickly. Ask other EU mills for slots now, and agree who pays if a surcharge follows spot power.
- Analysis Italian merchant bars: with Beltrame stopping on full days, check Turkish, UK or Swiss bar offers, which still have quota room. Leave Chinese bars out: China’s line is used up.
Stay ahead of the steel market
What to watch
- ArcelorMittal confirmation: any statement or customer letter on the Hamburg and Warsaw restart terms.
- Whether other mills follow: German and Polish mills that buy power on the spot market.
- Weekly quota report (Fridays) and 1 January 2027: Egypt’s wire rod line and the rebar lines, and the new quarter’s opening.
- German day-ahead power: a sustained return above €250/MWh would back up the mills’ case.
Verification status: Developing
- As of 17 November 2026, 13:25 CET. The ArcelorMittal halts are reported by Kallanish from unnamed sources and are not confirmed by the company; we found no ArcelorMittal statement. Beltrame’s stoppages come from its own statement, as reported by EUROMETAL/Kallanish, Il Fatto Quotidiano and ANSA. Mill products come from ArcelorMittal’s and Beltrame’s own websites, power prices from Energy-Charts, wire rod prices from SteelOrbis via EUROMETAL, quota balances from TARIC, and the Chinese wire rod duty from Implementing Regulation (EU) 2021/1805 and the 12 October 2026 review notice. Price comparisons and break-even prices are Loharo calculations with inputs shown. Next re-check: by 24 November 2026, or sooner if ArcelorMittal comments.
- Key: Verified = material factual claims are supported by an appropriate primary source or clearly attributed reporting/market assessments; Partially verified = a specific material claim remains unsupported, contradicted or materially overstated; Analysis = interpretation or forecast with sourced premises; Developing = material facts are checked but the situation is still changing.
Sources
Primary sources
- ArcelorMittal Bars & Rods, mill pages: Hamburg, Warszawa, Duisburg, Sosnowiec, read 17 November 2026
- AFV Acciaierie Beltrame S.p.A., company profile, Gruppo Beltrame, read 17 November 2026
- TARIC tariff quota details, Q4 2026, read 17 November 2026: wire rod 09.9900, 09.9901, 09.9902, 09.9903, 09.9904, 09.9905, 09.9906, 09.9907, 09.9617; rebar 09.9884, 09.9885, 09.9886, 09.9887, 09.9889, 09.9614; merchant bars 09.9878, 09.9879, 09.9880, 09.9881, 09.9613 (linked in the table), European Commission
- Regulation (EU) 2026/1384 (steel tariff quotas and 50% out-of-quota duty), EUR-Lex
- Commission Implementing Regulation (EU) 2021/1805 (anti-dumping duty on wire rod from China) and Notice of initiation of an expiry review (C/2026/5244), 12 October 2026, Official Journal of the European Union
- Day-ahead spot prices, Germany–Luxembourg, Energy-Charts (Fraunhofer ISE), 29 October–18 November 2026
Supporting sources
- ArcelorMittal halts mills on energy costs, Italians follow, Kallanish via EUROMETAL, 17 November 2026
- ArcelorMittal suspends rolling mills in Germany and Poland amid high energy prices, Metallurgprom (citing Kallanish), 17 November 2026
- Beltrame halts production until year-end on energy costs, Kallanish via EUROMETAL, 17 November 2026
- Beltrame halts production until year-end on energy costs, Shanghai Metals Market (SMM), 17 November 2026
- Le acciaierie con forni elettrici iniziano a fermare la produzione, Il Fatto Quotidiano, 11 November 2026 (Italian)
- Afv Acciaierie Beltrame ferma produzione in alcune giornate a novembre e dicembre, ANSA, 11 November 2026 (Italian)
- European longs demand slows price recovery amid high energy costs, import segment reverses trend, SteelOrbis via EUROMETAL, 9 November 2026
- Steel Trade Measures Tracker, Loharo
Last fact-check: 17 November 2026.
Planning steel imports into the EU? Estimate CBAM costs with the free calculator using EU default values. For supplier-specific emissions and a portfolio review, see the CBAM Cost Check.




